Текст страницы
Set description
Flashlight, 21700 Li-Ion 5000 mAh battery, 18650 battery adapter,
magnetic USB charger, clip, headmount, bicycle mount ABM-01, 2 spare
O-rings, user manual.
• Orange blinking — USB power source voltage is too low for correct
continuation of charging or bad contact between charger and battery.
Clean the tailcap and the threads of the flashlight parts, use a diffe
rent power source.
• Red — charging with rated charging current is going on.
• Orange — USB power source voltage is too low, charging current may
be reduced.
• Green — charging is finished.
The producer reserves the right to change the package at his own
discretion without modifying this manual. Specifications are sub
ject to change without notice.
Operation
Before use: Tighten the tailcap as far as it can go.
Initial Service
TO SET/REPLACE BATTERY
GENERAL TYPE
Modes: Firefly1, Firefly2, Main modes, Turbo mode (last used in
Advanced, Turbo2 by default).
1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the
flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
In OFF state
1 click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to
select. Keeping button pressed will start cycling through Main modes.
The flashlight is ready for operation.
HOW TO CONNECT THE MAGNETIC CHARGER
In ON state
1 click: To turn off the flashlight.
Press and hold: To start cycling through Main modes from any mode. In
Firefly1 cycling through Main modes starts after cycling through Firefly
modes. Release to select.
2 clicks: To turn on Turbo mode from any mode. The second double click
brings back last used mode.
ADVANCED TYPE
To switch between types of operation unscrew the tailcap to 1/4 while
the flashlight is off, press the button and tighten the tailcap while
keeping the button pressed.
Unscrew the tailcap for 1/4 of a circle and adjust the magnetic charger
to the tailcap.
Sections of modes:
[1] – Firefly modes, [2] – Main modes, [3] – Turbo modes,
[4] – Strobe modes
CHARGER COLOR INDICATION
Charger not plugged in:
• Green — device is in waiting mode.
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button
pressed will start cycling through modes: Firefly1 - Firefly2 - Main1 -
Main2 - Main3 - Turbo1.
Charger plugged in:
• Green blinking — evaluation of battery voltage.
• Red blinking — unscrew the tailcap for 1/4 for charging.
3
WIZARD C2 PRO MAX USER MANUAL ENG
REV_00-0003