Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DTW700
DTW701
Fastening capacities
Standard bolt
M10 - M24
High tensile bolt
M10 - M16
Square drive
12.7 mm
No load speed
Max impact mode (4)
0 - 2,200 min
-1
Hard impact mode (3)
0 - 1,900 min
-1
Medium impact mode (2)
0 - 1,200 min
-1
Soft impact mode (1)
0 - 500 min
-1
Impacts per minute
Max impact mode (4)
0 - 2,700 min
-1
Hard impact mode (3)
0 - 2,400 min
-1
Medium impact mode (2)
0 - 1,700 min
-1
Soft impact mode (1)
0 - 1,000 min
-1
Overall length
170 mm
Rated voltage
D.C. 18 V
Net weight
2.3 - 2.7 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING: Wear ear protection.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Model DTW700
Sound pressure level (LpA) : 94 dB(A)
Sound power level (LWA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model DTW701
Sound pressure level (LpA) : 94 dB(A)
Sound power level (LWA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Model DTW700
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (ah) : 19.0 m/s
2
Uncertainty (K) : 2.0 m/s
2
4
ENGLISH