Текст страницы
EN
FR
DE
ES
IT
NL
PT
●
●not all four wheels are on the ground
●
●the grass discharge chute is exposed
and is not protected by the grass catcher
and grass discharge chute cover
●
●hands and feet of all persons are not
clear of the cutting enclosure
■
■Never operate the product if the on/off
DA
SV
FI
switch on the handlebar does not properly
start and stop the product.
■
■Never attempt to lock the on/off switches in
NO
RU
the on position; this is extremely dangerous.
■
■Do not force the product. It will do the job
PL
CS
HU
●
●whenever
leaving
the
product
unattended (including disposal of grass
clippings)
●
●before clearing blockages or unclogging
discharge chute
●
●before checking, cleaning, or working on
the product
●
●before removing the grass catcher or
opening the grass discharge chute cover
●
●after striking a foreign object; inspect the
product for damage and make repairs
as necessary before restarting and
operating the product
●
●If the product starts to vibrate abnormally
(check immediately)
better and safer at the speed for which it
was designed.
■
■Stop the blade when crossing gravel
RO
–
– inspect for damage, particularly the
LV
LT
surfaces.
■
■Do not pull the product backwards unless
blades
–
– replace or repair any damaged parts
ET
HR
–
– check for and tighten any loose parts
■
■Avoid holes, ruts, bumps, rocks, property
SL
SK
BG
absolutely necessary. If you must back the
product away from a wall or obstruction,
first look down and behind to avoid tripping
or pulling the product over your feet.
■
■Turn off the motor and allow the blade
stakes, or other hidden objects. Uneven
terrain could cause a slip-and-fall accident.
■
■Always ensure that the motor control cable
UK
TR
is never trapped, pinched or otherwise
damaged during assembly or when folding
the handle.
to stop if the product has to be tilted for
transportation when crossing surfaces
other than grass, and when transporting
the product to and from the work area.
■
■Never use the product with defective guards
ADDITIONAL BATTERY SAFETY
WARNINGS
or shields, or without safety devices, such
as deflectors or grass collectors, in place.
■
■Do not tilt the product when turning on

WARNING
To reduce the risk of fire, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals,
and bleach or bleach-containing products,
etc., can cause a short circuit.
PRODUCT FEATURES
the motor or while the motor is running. If
absolutely necessary, you may raise the
front of the lawnmower by no more than 5
cm to enable easier starting. Press down
on the handlebar to achieve this. Always
return the lawnmower to its normal position
with all wheels on the ground before cutting.
Tilting the lawnmower exposes the blade
and increases the probability of objects
being thrown and accidental contact with
the blade.
■
■Turn on the motor carefully according to
instructions and keep hands and feet away
from blades. Do not put hands or feet near
or under rotating parts.
■
■Never pick up or carry the product while it
is running.
■
■Turn off the product, and remove the
isolator key and the battery pack. Make
sure that all moving parts have come to a
complete stop:
OVERLOAD AND OVERHEAT PROTECTION
The product has an overload protection
device. When overloading is detected, the
product will automatically turn off. If the
overload protector is actuated, the on/off lever
must be released. Squeeze the on/off lever to
restart the product.
The battery pack has overheat protection.
Excessive temperatures will cause the battery
3
English |