Текст страницы
Gas Connection and Safety
Main Gas Pipe
Gasket
Hose Inlet Connector
Metal Clamp
Lpg Connection Hose
1. For LPG (cylinder) connection, affix
metal clamp on the hose coming from
LPG cylinder. Affix an edge of the hose
on hose inlet connector behind the appli-
ance by pushing to end through heating
the hose in boiled water. Afterward,
bring the clamp towards end section of
the hose and tighten it with screwdriver.
The gasket and hose inlet connector
required for connection is as the picture
shown below.
NOTE: The regulator to be affixed on LPG cylinder should have 300
mmSS feature.
Main Gas Pipe
Gasket
Nut
2. Natural gas connection should be
done by authorized service. For natural
gas connection, place gasket in the nut
at the edge of natural gas connection
hose. To install the hose on main gas
pipe, turn the nut. Complete the connec-
tion by making gas leakage control.
Natural Gas Connection Hose
Gas hose and electric connection of the appliance should
not pass next to hot areas such as back of the appliance.
Gas hose should be connected by making wide angle turns
against breaking possibility. Movement of appliance whose
gas connection is made may cause gas leakage.
True
True
True
False
34