Текст страницы
6 Installation of appliance
6.5 Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
6.6 Adjusting the bracket position
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after instal
lation.
Glass
Retaining bracket
Screw
ST3.5*8
Bottom case
worktop/kitchen cabinet
A
B
C
D
screw
bracket
screw hole
bottom case
Cautions
• The induction hotplate must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
• The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine
or clothes dryer, as the humidity may damage the hob electronics.
A
• The induction hotplate shall be installed such that better heat radiation can be ensured
to enhance its reliability.
• The wall and induced heating zone above the table surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.7 Connecting the cooker to the mains power supply
This hob must be connected to the mains power supply only by a suitably quali- fied person.Before con
necting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
The power supply cable sections can withstand the load specified on the rating plate. To
connect the cooker to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
B
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without altera
tions. alterations must only be made by a qualified electrician.
Induction Hob / User Manual
21 / EN