Текст страницы
EN
Automatic power OFF function (operating time
limitation)
Dependent on the selected setting, every cooking
zone will be switched-OFF after a defined maximum
operation time if no operation of the assigned cooking
zone follows within this time period.
Every change of the cooking zone condition (by
means of (+) 1, (-) 2 or dual-circuit 3 key for the
respective cooking zone) puts back the maximum
operation time of this cooking zone to the initial value
of the operating time limitation.
2
1
3
4
Protection against unintended switching on
If the electronic control realizes a continuous
operation of keys for approx. 10 seconds, it switches
OFF automatically. The control sends out an audible
failure signal for 10 seconds, so that the user can
remove the object which has been mistakingly placed
onto the operation surface.
The displays show the failure code “E R 0 3“. If the
failure carries on for more than 10 seconds, only the
code “E R 0 3“ will be displayed as long as the failure
will be recognized by the electronic control. If the
cooking zone is in the “hot” status, “H“ will appear on
the display in alteration with the failure notice.
If no cooking zone will be activated within 20 seconds
after switching-on by means of the Power-key 4, the
control switches back from the ON-condition into the
stand-by-mode.
When the control is switched-on the ON/OFF-key has
priority over all other keys, so that the control can be
switched-OFF anytime, even in case of multiple or
continous operation of keys.·
In the stand-by mode a continous operation will not be
signalized.
However, before the electronic control can be
switched-ON again.
It has to recognize that all keys are not operated.
28