Текст страницы
EN
H05RR - F3x2.5
H05RR - F4x1.5
H05RR - F4x1.5
H05RR - F5x1.5
H05RR - F3x2.5
H05RR - F4x1.5
H05RR - F5x1.5
NSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the cooking hob to the mains power
supply, make sure that:
the plant characteristics are such as to follow
what is indicated on the matrix plate placed at the
bottom of the working area,
the mains supply has an efficient ground
connection complying with all applicable laws and
regulations.
Correct grounding is a legal requirement. If the appliance
is not pre-fitted with a power cable and/or plug, use only
suitable cables and plugs capable of handling the power
specified on the appliance's data plate and capable of
resisting heat. The power cable should never reach a
temperature 50°C above ambient temperature at any
point along its length.
If the appliance is to be connected directly to mains
terminals, fit a switch with minimum aperture of 3 mm
between the contacts. Make sure that the switch is of
sufficient capacity for the power specified on the
appliance's data plate, and compliant with applicable
regulations. The switch must not break the yellow-green
earth wire. The socket or switch must be easily reachable
with the cooking hob fully installed.
Attention! The manufacturer declines all
responsibility for damage or injury if the
above instructions and normal safety
precautions are not respected
6