Текст страницы
Starting-up
• Start up / switch off the hob:
Action
Control panel
Display
To start
press key [
]
4 x [ 0 ] are blinking
To stop
press key [
] nothing or [ H ]
• Start up / switch off a heating zone:
Action
Control panel
Display
Zone selection
press display [ 0 ] selected
[ 0 ] and control light on
To set
slide on the “SLIDER“
[ 0 ] to [ 9 ]
(adjust the power)
to the right or to the left
To stop
slide to [ 0 ] on “SLIDER“
[ 0 ] or [ H ]
or press on [ 0 ]
[ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like nuddles
cooking.
• Start up / Stop the booster function:
Action
Control panel
Display Zone
Zone selection
press key [ 0 ] from the zone
[ 0 ] and control light on
Start up the booster
press key [ P ]
[ P ]
Stop the booster
slide on the “SLIDER“
[ P ] to [ 0 ]
or press on [ P ]
[ 9 ]
29