Текст страницы
70 English
4. When the timer is set, it will begin to count down immediately,
the display will show the remaining time.
NOTE: The red dot next to power level indicator will
illuminate for those zones be set with timer. You can check timer
setting of different cooking zone which set with timer, by press
corresponding cooking zone select button.
NOTE: If more than one heating zone has timer setting, the
timer indicator will show the lowest time. The red dot next to
power level indicator will flash.
5. When cooking timer expires, the corresponding cooking
zone will be switch off automatically.
NOTE: The default setting of minute reminder and timer is 30 minutes.
NOTE: After adjusting, the setting in timer indicator will flashing for 5 seconds and
then stop flashing, then the setting be confirmed.
NOTE: The minute reminder and timer can be use at same time, timer indicator
shows the lowest time setting. If the lowest setting is minute reminder, the red dot next to
timer indicator will flash. If the lowest setting is timer setting, the red dot of corresponding
cooking zone power level indicator will flash.
NOTE: If indicator shows timer setting of cooking zone. To check minute reminder
setting, press the timer control button
, the indicator will show minute reminder
setting.
Detection of Pan and Small Articles
For induction hob, if display flashes ”
“ alternately with heat setting.
; you have not placed a pan on the correct cooking zone or,
; the pan you’re using is not suitable for induction cooking or,
; the pan is too small or not properly centered on the cooking zone.
Notes:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. The display will auto turn off after 2 minutes if no suitable pan is placed on it.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other
small item (e.g. knife, fork, key) has been left on the hob, the corresponding cooking
zone will automatically turn off in 1 minute.