Текст страницы
GB
Electrical Connection
WARNING: This hob shall be correctly installed and connected by the
authorized service and according to the manufacturer's instructions.
Manufacturer shall not be held responsible for implicitly and explicitly
losses due to improper installation and maintenance works.
WARNING: Manufacturer shall not be held responsible for any losses
(such as electric shock) due to a missing or defective protective cable.
Insulated parts should be inspected after installation.
The appliance is designed for electric supply of 220-240 V N AC / 380-
415 V 3N AC 50/60 Hz. If your power network does not provide these
specifications, contact an electrician or an authorized service.
Do not allow the power cord of your appliance to contact hot parts of the
appliance. Keep it away from sharp edges and corners.
Circuit Breakers
Power supply should be disconnected from the mains using an all-poles
breaker. (Contact gap should be at least 3 mm). This breaker protects
against over-current.
Disconnecting from mains
To disconnect mains power to the appliance;
-Fuse elements
Remove the fuse completely from the base. Or:
-Automated fuses
Press (red) control button to release middle button. Or:
-Embedded automated fuses
Turn it to 0 (OFF) position from 1 (ON) position.
(Line breaker should be at least B or C type) Or:
-FI-circuit breaket (False Induction breaker)
Turn it to 0 (OFF) position from 1 (ON) position or press inspection
button.
WARNING: Take safety precautions against turning on power unintentionally.
12