Текст страницы
（4）
Installation shall be performed by professional service personnel in accordance with local
regulations.
（5）
User-friendly power-off equipment shall be connected in series during the installation and
wiring of building.
（6）
Ensure that the connection can bear the weight at least 4 times the weight of the product
before installing the equipment on a wall or ceiling.
（7）
Do not directly touch the heat-dissipating parts of the integrated machine, to prevent burns.
Note:
（1）
Prevent operations that may cause damage to products during the transportation and storage,
such as heavy pressure, severe vibration and immersion.
（2）
Please check whether the power supply is correct before powering on the camera.
（3）
Do not directly touch the image sensor with any object, and wipe off the dirt with a lens
tissue or eyeglass cloth slightly wet with alcohol if necessary, and do not give it a vigorous
wipe to prevent scratching.
（4）
Please prevent pointing the lens directly at strong light (such as lighting, sunlight, etc.),
otherwise, over-brightness or glare (this is not a failure of camera) may be caused, and the
service life of image sensor may be affected.
（5）
Laser beam may burn the image sensor. When laser device is used, please be careful not to
expose the surface of image sensor to the laser beam.
（6）
Do not place it in humid, dusty, extremely hot or cold, or strong electromagnetic radiation
places.
（7）
Please ensure a sufficient distance between the installation location and surrounding
electromagnetic sensitive equipment, to prevent possible electromagnetic interference.
（8）
Avoid heat accumulation and keep the surroundings of camera well ventilated.
（9）
Do not allow water or any liquid to flow into the equipment during use.
（10）Products shall be provided with original packaging of the factory when being delivered or
returned to the factory, otherwise, the damage to the network camera during transportation
is not covered by the warranty.
7