Текст страницы
Parking setting interface
(1) Select the rule number, set the event as parking, and check [Enable] to enable the rule.
(2) Draw the parking detection area.
(3) Set the alarm time: indicate that an alarm will be triggered when the target is kept in the parking
state in the picture for the time specified.
(4) Set the speed threshold to indicate that the target will enter the parking state when the moving
speed (percentage / second) in the screen is less than the speed.
(5) Click save after setting.
[Event Type] = > [Behavior Analysis] = > [ alert]
(1) Select the rule number, set the event as alert, and select enable the rule effectively.
(2) Draw alert detection area.
(3) Set the sensitivity. The larger the value is, the more sensitive it is.
(4) Click save after setting.
[Event Type] = > [Behavior Analysis] = > [heat map]
(1) Select the rule number, set the event as the heat map, and select valid to enable the rule.
108