Текст страницы
10
EN
COFFEE MAKER SWITCH-ON TIME
SETTING FUNCTION
• 1. Press the button (19) «
», the symbol (10) «
»
will light up and flash, the display (12) will show the
symbols «00:00».
• 2. By pressing the button (11) «Hours», set the
time to «13» hours, by pressing the button (13)
«Minutes», set the time to «00» minutes.
• 3. After 5 seconds, if no control buttons are pressed,
the delayed start function will be activated, and the
symbol (10) «
» will glow constantly.
• 4. The display (12) will show the current time, when
the current time matches the set delayed start time,
the coffee maker will switch on, the button (16)
indicator will light up and flash red.
• 5. After the coffee has been brewed according to your
settings, you will hear a sound signal, the button (16)
indicator will turn green and the warming function will
switch on.
Notes:
• Open the lid (7).
• Measure the required amount of ground coffee and
pour it into the filter (5 8), use the measuring spoon
(23). 6 grams of ground coffee per one coffee cup is
required on average; adjust the quantity according to
your taste.
• Fill the tank (6) with cold water up to the required
level. Determine the water level using the scale (7).
• Close the lid (7).
• Put the flask (2) on the tray (3).
• Plug the power cord into an electrical outlet, you will
hear a sound signal, the on/off button (16) indicator
«
» will light up, the coffee maker will switch to the
standby mode.
• To enter the settings mode, press the on/off button
(16) «
» once again.
• Set the current time if no current time is set. (see the
section «Setting current time»). Time format is 24
hours.
• Select the desired number of cups of coffee by
pressing the button (18) «
» and select the desired
strength of the ready coffee by pressing the button
(17) «
».
Example: suppose the current time is «09:00» AM and
you wish to prepare coffee at «01:00» PM.
-
the warming time for the ready coffee is limited to
40 minutes;
-
when the warming function for ready coffee is
operating, the control buttons are blocked for
safety reasons, to disable the keep warm function,
press the on/off button (16) «
».
• When it is no longer necessary to heat the flask (2),
be sure to switch the coffee maker off by pressing the
on/off button (16) «
», unplug the power cord from
the electrical outlet.