Текст страницы
How to Use
Preparation before Use
When using the espresso machine for the first time, clean the water tank, portafilter, single-cup
powder bowl, and double-cup powder bowl with warm water or detergent, wash them with clean
water, and wipe them dry.
2. Install the drip tray and the drip tray grid onto the
espresso machine.
1. Remove the silicone protective plug at the botom
of the water tank.
3. Lif up the water tank to take it out, add water to the
maximum water level (the mark of MAX), and put the
water tank back into the espresso machine.
Note: Push down the water tank with gentle force and
make sure it is installed in place.
4. Align the handle of the portafilter with the unlocking
icon, and install the portafilter onto the espresso machine.
Turn the handle of the portafilter counterclockwise to
the locking icon.
Note: It may be a litle tight when turning the portafilter. This
is normal and make sure the portafilter is installed in place.
MAX
5. Insert the plug into the power socket. The espresso machine gives a beep as a notification sound and
blinks, and then the espresso machine enters the standby mode.
Turning On/Off
Press to turn on or off the espresso machine.
If no operation is performed for more than 30 minutes, the espresso machine automatically
turns off and the power indicator goes off.
In the standby mode, simultaneously press and hold and for 3 seconds to restore factory
setings.
04