Текст страницы
ENG
2.0 USB Multimedia
Speaker System with Bluetooth
5. PREPARATION AND OPERATION
MSS Connecting
SVEN 431 Multimedia USB Speaker System can be connected to virtually any audio source: a МР3/
CD, PC sound card, etc. (see Fig. 2).
• Before connecting, make sure that the MSS is unplugged. Insert the 3.5 mini-jack signal cable
built into the active speaker into the sound source audio output (see Fig. 2).
• Set the master volume level to its minimum by turning the volume control knob d ounterclockwise
until it stops.
• Plug the USB cable to the USB port of your PC or laptop, or to your 5V DC power supply.
• Turn on your PC, switch on the device with the POWER | VOLUME switch d, the power LED c
will illuminate.
• Turn on your audio source. Adjust the master volume level with the volume control knob d. To
increase the volume, turn the knob clockwise; to reduce the volume, turn it counterclockwise.
• Plug your headphones into the headphone jack b.
Bluetooth mode
In order to transmit signal in this mode it is necessary at first to connect the device with a signal
source (see Fig. 2). To do this, select the Bluetooth mode: press the BLUETOOTH a button on the
MSS front panel. The indicator c will flash blue and red.
Passive
speaker
Аctive
speaker
PC
Mobile device
Audio
cable
Signal cable
PC/DC=5V
Fig. 2. Connection diagram
14