Текст страницы
ENG
USB 2.0 Speaker System
with Bluetooth
• Turn on your audio source.
• Adjust the master volume level by turning the VOLUME control knob b. To increase the vol-
ume, turn the knob clockwise; to reduce it, turn the knob counterclockwise.
Note. After finishing using the MSS, mind to switch it off.
TROUBLESHOOTING
Problem
Cause
Solution
The MSS does not turn
on.
The MSS isn’t connected
to a mains outlet.
Check the connection.
No sound.
The volume level is set
at minimum value.
Adjust the volume control knob.
Improperly connected audio
source.
Connect audio source correctly.
There is too quiet
sound of speakers.
The volume level
is set at minimum value.
Adjust the volume control knob.
Distortion of sound.
Large amplitude of the input
signal.
Turn down the source volume
and MSS volume.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit
Value
Output power (RMS), W
6 (2 × 3)
Frequency response, Hz
100–20 000
Speaker diameter, mm
Ø 47
Power supply, V
USB ⎓ 5 V
Rated current consumption, A
0.01
Dimensions (one speaker) (W × H × D), mm
64 × 106 × 70
Weight, kg
0.4
Notes. Technical specifications given in this table are supplemental information and cannot give
occasion to claims. Technical specifications and package contents are subject to change without
notice due to the improvement of SVEN production.
Technical support is on www.sven.fi