Текст страницы
ENG
USB 2.0 Speaker System
with Bluetooth
Bluetooth connection
• Connect the USB cable of the AS to a power source: USB port of a computer, laptop or 5V
power adapter (not included)
• Switch to Bluetooth mode by pressing button a.
• To connect “SVEN G342” using Bluetooth, turn on the device, find available Bluetooth devices,
select “SVEN G342” and then perform pairing. Start audio playback on the source device
and set the volume.
• Press shortly button a to switch Play/Stop modes. In the Pause mode blue LED will blink.
• Double press button a to disconnect Bluetooth connection.
Note. After finishing using the AS, mind to switch it off.
TROUBLESHOOTING
Problem
Cause
Solution
Check the connection.
The AS does not turn
on.
The AS isn’t connected
to a mains outlet.
Adjust the volume control knob.
No sound.
The volume level is set
at minimum value.
Connect audio source correctly.
Improperly connected audio
source.
Adjust the volume control knob.
There is too quiet
sound of speakers.
The volume level
is set at minimum value.
Distortion of sound.
Large amplitude of the input
signal.
Turn down the source volume
and AS volume.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit
Value
Output power (RMS), W
8 (2 × 4)
Frequency response, Hz
100–20 000
Speaker diameter, mm
Ø 47
Power supply, V
USB ⎓ 5 V
Rated current consumption, A
0.01
Dimensions (one speaker) (W × H × D), mm
65 × 108 × 60
Weight, kg
0.392
Notes. Technical specifications given in this table are supplemental information and cannot give
occasion to claims. Technical specifications and package contents are subject to change without
notice due to the improvement of SVEN production.
Technical support is on www.sven.fi