Текст страницы
ENG
Operation Manual
MS-150
2xRCA to mini-jack 3,5 mm
signal cable
CD
Player
Right
speaker
Left
speaker
Power
cord
Audio cable
Audio cable
PC
Fig. 3. Connection diagram
• Before making any connections, make sure that the MSS is switched off. Connect the audio cable
built into the speakers into OUTPUT e on the subwoofer (see Fig. 3)
• Connect 2xRCA jack of the stereo signal cable (included) to INPUT d jack on the subwoofer, and
the other mini-jack (3,5 mm) to LINE OUT of your PC or МР3/CD player or to the audio output
(OUTPUT) jack of the mobile device.
• Adjust the master volume level to the minimum by turning VOLUME control knob a counter-
clockwise until it stops. Then connect the subwoofer to the mains outlet using the built-in power
cord f.
• Turn on the subwoofer power using POWER switch (g, ON position), power LED b will light.
Then turn on the sound source and adjust the master volume with VOLUME knob a, and the bass
level – with BASS knob c.
Note.
• If the MSS is left unused for a long period of time, please mind to switch it off using
POWER switch g (OFF position) on the subwoofer rear panel and pull out its plug f from
the socket.