Текст страницы
ENG
Operation Manual
MS-2055
USB
SD
FM antenna
SD MMC CARD
RADIO ANT
U DISK
FM
ANT
POWER SWITCH
ON
L
PC
R
USB flash/SD card
Mobile device
AUX
L
R
connection
AUDIO INPUT
OFF
L
PC
A U D IO O U T P U T
R
Right
speaker
Left
speaker
Fig. 6. Bluetooth module connection diagram
• To connect the MSS to a PC, МР3/CD player, use 2RCA to mini-jack signal cable (included). Con-
nect the RCA jacks of the signal cable to the L and R jacks of the PC AUDIO INPUT m, and the
mini-jack (Ø 3.5 mm) of the signal cable – to the LINE OUT port of your PC sound card or to the
audio output (OUTPUT) of your МР3/CD player, as shown in Fig. 5.
• To connect the MSS to a TV set or DVD/CD players, use 2RCA to 2RCA signal cable (not included).
Connect at first the RCA jacks of the signal cable to the L and R jacks of AUX AUDIO INPUT n and
then connect RCA jacks to your TV set or DVD/CD player audio output jacks, as shown in Fig. 5.
• Connect the subwoofer to the mains outlet with the power cord k.
• Turn on the MSS power supply using ON/OFF switch (j, ON) on the subwoofer rear panel.
• Turn on the MSS using knob d on the front panel or button ST-BY e on the front panel or button
q on the remote control.
• Select a desired signal source pressing short button d on the control panel or pressing INPUT
button a on the remote control.
• Adjust the master volume as desired with VOLUME knob d on the control panel or with the VOL+/-
buttons k on the remote control.
• Adjust the bass and timbre level using BASS+/- e and TREBLE+/- b buttons on the re mote
control. The timbre level of the system can be also adjusted using knob d on the control panel
preselecting this option with MENU button b.
• Use SW+/- buttons f on the remote control to adjust the subwoofer volume level. The volume
level of the subwoofer can be also adjusted using knob d on the control panel preselecting this
option with MENU button b.
• In order to have the high-fidelity reception direct the antenna to a required direction when listening
to the radio, first connecting the antenna to RADIO ANT jack l (see Fig. 5).
• When the MSS operation is over, mind to switch it off using ON/OFF switch (j, OFF position) and
unplug the power cord k from the socket.