Текст страницы
ENG
2.1 Multimedia Speaker
System with Bluetooth
Radio Mode
• Use button e on the front panel of the subwoofer or FM button i on the remote control
to enter the Radio mode. The display a current adjustment frequency.
• Press short AUTO button d on the front panel of the subwoofer or button k on the remote
control short to auto scan and memorize the found stations. The second pressing of this button
before the scanning is over will stop the auto scanning process. The display a shows the fre-
quency being scanned, when a radio station is being memorized, the display shows its assigned
sequence number for a short moment.
• For manual scanning, use buttons TUNE-/+ d on the remote control (up/down the frequency
range). To save a selected frequency, press SAVE/DELETE button o on the remote control, then
using buttons e and l on the remote control select a cell number to save and press the SAVE/
DELETE button o once again. When saving, the display a will show the message «good». To
delete the station, press and hold SAVE/DELETE o button, «good» will appear on the display a.
• If preset radio stations are available in the memory, you can switch from one to another by
short pressing buttons c and g on the front panel of the subwoofer or buttons e and l
on the remote control. You can also enter the frequency or the number of the preset station
using numeric pad buttons g on the remote control. The radio will tune to the set frequency
within 2-3 seconds.
AUX Mode
To switch to the AUX mode, press the button e on the front panel or the AUX button j
on the remote control, the MSS switched on. The display a will show «AUX» inscription.
MUTE Mode
To enter the MUTE mode, press button m on the remote control. To exit the MUTE mode, press
this button m again.
Note. Due to the constant development of the software, the actual MSS operation may dif-
fer from that described in this Manual. The most recent version of the Manual is available
at www.sven.fi.