Текст страницы
EN
INSTALLATION INSTRUCTIONS
INSTALLATION
Unhampered access to all control units as well as
duly ventilation of the kitchen are primary
installation requirements.
Before using your new appliance, make sure to fit
it properly. By fixing the adjustable feet in a proper
position, you can keep the upper surface strictly
horizontally and, thus, avoid backlash. For this
purpose, take out the drawer at the bottom.
The cooker is intended to be build up into kitchen
furniture, however, only up to the height of the
working plate, i.e. fixing up higher than 850 mm
from the floor level is unreasonable.
All materials used for furniture panels should be
heat resistant at the temperature 100°C minimum.
Breach of this regulation can result in distortion or
ungluing of panel coverings. To avoid heat
distortion of the furniture panels, ensure that the
space between the contact surfaces is not less
than 2 cm.
Please mount the fume extractor hood at about
600-700 mm above the cooking surface (see
installation instructions for your fume extractor
hood).
3,5 kWt gas cookers are provided with a
connecting cable (cross-section – 3 x 1,5 mm2,
length – approx. 1,5 m) and a plug equipped with a
safety stud.
Make sure that the AC outlet is isolated and not
placed above the cooker.
After the cooker has been installed, check up if the
electrical outlet is easy to access.
6