Текст страницы
Management Options
2. D-Link Network Assistant
The DGS-1100-24V2 switch can be managed through
the Web UI or the D-Link Network Assistant (DNA)
utility.
D-Link Network Assistant (DNA) is a program that is used
to discover switches which are in the same Layer 2
network segment as your PC. You can download the DNA
App from the Chrome Web Store and install it in a Chrome
web browser.
1. Go to the Chrome web store and search for ‘D-Link
Network Assistant’ to download the App. This can be
If you want to manage only one D-Link Smart switch, the
Web-based management is the better option. Each switch
must be assigned its own IP address, which is used for
communication with Web UI. The PC should have an IP
address in the same range as the switch.
eached at the following URL:
https://chrome.google.com/webstore
2. Click ‘ADD TO CHROME’ button on the right hand side of
the search results.
3. Click ‘Add app’ button in the pop up window to install the
D-Link Network Assistant in Chrome.
However, if you want to manage multiple D-Link switches,
the DNA utility is the better option. Using the DNA utility,
you don't need to change the IP address of your PC and it
is easy to start the initial setting of multiple switches.
Please refer to the following detailed installation instructions
for the Web-based management and DNA.
4. When the installation process completes:
(Option 1) Click the ‘LAUNCH APP’ button in the
upper-right corner of the window to start DNA.
1. Web-Based Management Interface
(Option 2) Click the ‘Apps’ icon in the upper-left corner
the Chrome browser and click ‘DNA’ in the Apps list
to start DNA.
After a successful physical installation, you can
configure the switch, monitor the LED panel and
display statistics graphically using a Web browser,
such as Microsoft Internet Explorer, Firefox, Chrome or
Safari.
You need the following equipment to begin the web
configuration of your device:
Note: for managed switches, users need to enable D-Link
• A PC with a RJ-45 Ethernet connection
ENGLISH
• A standard Ethernet cable
Discovery Protocol (DDP) and create a user name and
password to be able to log in to DNA.
1. Connect the Ethernet cable to any of the ports in front
panel of the switch and to the Ethernet port on the PC.
Additional Information
To find out more about D-Link products, please visit
the website
http://www.dlink.com/
2. To access the Web User Interface, simply open a
standard web browser on the management PC and
enter the Switch’s default IP address into the address
bar of the browser and press the Enter key.
Note: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.255.255.0
and a default gateway of 0.0.0.0.
3. The user authentication window will be opened.
By default, the username is “admin” and the password
is also “admin”. Click the Login button.
4