Текст страницы
Version 1.0
Configure the switch to access the internet
Networking requirement
You want to configure the switch to access the internet.
Tip
The following shows the steps to access the internet when the switch’s DHCP client is disabled.
(When the DHCP client is enabled, the switch automatically obtains IP address and other parameters from
the upstream router.)
Assume that:
−
LAN IP address/subnet mask of the upstream router: 192.168.1.1/255.255.255.0
−
Primary & secondary DNS server address: 192.168.108.108, 192.168.108.110
The network topology is as shown below.
WAN port
Router
Internet
LAN port
This switch
This switch
This switch
Surveillance network
Office area
Meeting room
Configuration procedure
1.
Log in to the web UI of the switch.
2.
Configure the IP address, subnet mask, gateway and DNS server addresses of the switch.
Appendix 51