Текст страницы
IM2024
On the back of the housing, slide the plastic lock, unscrew the four screws and pull out
the filter frame (as shown in the figure below)
Filter cleaning
To clean the filter, put it in warm water with a mild detergent (with a temperature of about
40° C), rinse it and remove any dirt. Before installing the filter in the air conditioner, it is
necessary to dry it, avoiding direct sunlight.
Air intakes (heat exchangers)
Use a vacuum cleaner for cleaning
Case
Wipe the surface by a damp cloth and dry it by a soft dry cloth.
Automatic condensate removal
Condensate is automatically removed from the unit. Moisture inside the unit starts to
evaporate and is removed from the unit through an air duct (or an air diffuser) in the form
of steam.
Condensate removal instructions
1. When condensate is filling the tank, switch off the air conditioner and turn off the
power.
Note: Move the device carefully to avoid spilling of water in the bottom of the case
2. Place the water container behind the outlet at the rear part of the device
3. Unscrew the drain cap and pull out the plug, the water will automatically flow into the
water tank.
64