Текст страницы
EN
Using the Mode Function
Restarting the Air Conditioner
Automatically
This function allows you to select the desired
function.
Cooling Mode
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings.
Disabling Auto Restart
1
Open the front cover (Type2) or horizontal
vane (Type1).
Auto Changeover Mode / Auto
Operation(AI) Mode
Dehumidification Mode
Heating Mode
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and
the lamp will blink twice 4 times.
x To re-enable the function, press the ON/
OFF button and hold it for 6 seconds. The
unit will beep twice and the lamp will blink
4 times.
Fan Mode
Type1
Cooling Mode
1
Turn the appliance on.
ON/OFF
Type2
2
Press Mode button repeatedly to select the
Cooling Mode.
x
is displayed on the display screen.
ON/OFF
3
Press
or
button to set the desired
temperature.
NOTE
x The feature may be changed according to the
type of model.
x If you press and hold the ON/OFF button for 3
– 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling air
for 18 minutes and then returns to factory
default settings.
18