Текст страницы
ENGLISH
«
» - Monday-Friday (non-adjustable program).
«
» - Saturday-Sunday (non-adjustable program).
«
» - Monday-Friday (adjustable program).
«
» - Saturday-Sunday (adjustable program).
«5» - Friday;
«6» - Saturday;
«7» - Sunday.
• Press the «
» button (8) to confirm the day of the
week and to enter the time settings - the «
»
icon will appear on the display (9).
• Use the «
» and «
» buttons (7) to set the cur
rent time «hours».
• Press the «
» button (8) to confirm the current
time «hours» and proceed to set the current time
«minutes» - the «
» icon will appear on the dis
play (9).
• Use the «
» and «
» buttons (7) to set the cur
rent time «minutes».
• Press the «
» button (8) to confirm all settings.
Notes:
–
– current time and day of the week will reset to fac
tory default if the heater has been unplugged
from the mains;
–
– when using the heater control program via Wi-Fi,
the current time is synchronized with the time on
your smartphone.
ROOM HEATING MODE
• Press and hold the «
» mode selection button
(11) to enter the operation mode.
• Press the «
» button (11), to start a continuous
room heating cycle. The convection heater opera
tion mode is shown below:
SETTING PROGRAM «
»
1. In «
» program mode, press and hold the «
»
button (11) for more than 3 seconds to set the day.
2. The «
» icon will appear on the display (9). Use
the «
» or «
» buttons (7) to set the desired
day, Monday-Sunday «
–
». Press the «
»
button (11) to confirm and go to the time setting.
3. The «
» symbols will appear on the display (9).
Use the «
» or «
» buttons (7) to set the time
from 00 to 23 hours. Press the «
» button (11)
to select the heating mode for each hour. The
«Comfort» mode «
» or the «Eco» mode «
»
work modes are indicated by the indicators (6).
4. Repeat the setup until you have set the heater
schedule for each hour and each day.
Notes:
–
– after setting the heating mode for 23 hours, press
the «
» button (7) to return to the day settings.
–
– when the «
» icon appears on the display (9),
press the «
» button (7) to finish all settings.
The ««
» icon will appear on the display (9).
The operating modes are displayed using indica
tors (6):
«
» - «Comfort» mode: use the «
» or «
»
buttons (7) to set the desired temperature from
5 °C to 35 °C;
«
» - «Eco» mode: use the «
» or «
»buttons (7)
to set the desired temperature from 1 °C to 31 °C.
Note: «Eco» mode = «Comfort» mode - 4 °C.
ANTI-FREEZE MODE
The anti-freeze mode is indicated by the «
»
icon on the display (9) and is activated at 7 °C. The
temperature is not adjustable in this mode.
SHUT OFF TIMER
• Press the «
» button (8) once - the display (9)
will show the flashing «
» icon.
• Use the «
» or «
» buttons (7) to set the time
from 0 to 24 hours.
• Press the «
» button (8) again to confirm the
timer setting.
PRE-SET ROOM HEATING PROGRAMS
«
–
–
»
Note: if the current time and day of the week are not
set, you must set the time and day of the week.
«
» - Monday-Sunday (non-adjustable program).
OPEN WINDOW FUNCTION
• While in standby mode, press and hold the «
»
mode selection button (11). The «
» or
«
» icons will appear on the display (9),
allowing you to choose between turning the
open window function on or off using the «
»
or «
» buttons (7).
10