Текст страницы
Installing water cooling radiators & cooling fans
Installing the 2.5" SSDs
Removing side panels
RIGHT
1
2
4
1
RIGHT
RIGHT
RIGHT
* Max. component height on motherboard is 34mm
2
RIGHT
(Top)
1
1
240
1-1
2
120
1-2
LEFT
120
4
1
(Rear)
3
* Please insert the 2.5" SSD holes to the bottom tabs, and then
use 2 screws to tighten it on the top.
1
3
2
Connectors
3
3
(Front)
2
LEFT
LEFT
2-2
BOTTOM
120
120
Connectors
2
RIGHT
3
1
2-1
120
Connectors
4
* The 2.5” SSD at this place only supports for the thickness of 7mm.
* Please install the 7mm thickness of 2.5” SSD in the direction of the
arrow, and use 3 screws to tighten it.
Installing PCI-E cards
Installing the 3.5" HDDs
Controlling lighting modes
RIGHT
LEFT
(Please don't remove the
SATA connector from the PSU)
The pre-installed ARGB fan
at rear panel
RIGHT
RIGHT
1
2
Power suppy
Power connector
RIGHT
1
First Mode: Several Lighting Effects
Please connect the power cable of the ARGB strip at the front panel to a SATA connector
from the PSU. You can use the top panel’s RGB SW button to switch various beautiful
lighting effects we have preset for you.
※ If you press and hold the RGB SW button for 3 seconds, the light of the RGB LED strip
will flash in white for one time. Please release the RGB SW button and then press and hold
the RGB SW button for 3 seconds again, the light will be turned off.
1
RIGHT
(Please don't remove the
SATA connector from the PSU)
The pre-installed ARGB fan
at rear panel
2
1
Power suppy
Power connector
Support for graphics card up to 305mm-long
Connectors
RIGHT
BOTTOM
for Compatible Asus or MSI
Motherboards
5V Addressable Header Adapter
COUGAR USA Technical Service
Tel: (833) 256-3778
Mail: rma@compucaseusa.com
https://cougargaming.com/support/contact/upload/
1
2
Second Mode: Motherboard Synchronization
Please use the included adapter to connect to a compatible motherboard’s 3-pin 5V
Addressable RGB header, and press and hold the RGB SW button for 3 seconds. You
can enjoy system-wide ARGB synchronization.
Compucase Enterprise Co.,Ltd.
No. 225, Lane 54, An Ho Road Sec. 2 Tainan, Taiwan, R.O.C
Tel:+886-6-356-0606
Service E-Mail:service@cougargaming.com
2
※ If you press the RGB SW button for one second, it will be returned to the first preset
lighting effect.
Connectors
3
Third Mode: CORE BOX V3 and 3-pin 5V ARGB Fans (sold separately)
For more information, please visit
www.cougargaming.com
If you want to install more ARGB fans, we recommend you to use our Core Box V3 and
3-pin 5V ARGB fans (sold separately). They have compatible motherboard's 3-pin 5V
Addressable RGB headers for system-wide synchronization.
Made in China
Compucase Enterprise Co.,Ltd.
All rights reserved.