Текст страницы
Z3 ICEBERG
I/O Ports
#
Part
#
Part
#
Part
#
Part
ⓐ
Power Button
ⓑ
HDD / Power LED
ⓒ
Reset Button
ⓓ
USB 3.0 Ports
ⓔ
USB 2.0 Port
ⓕ
Headphone Jack
ⓖ
Microphone Jack
ⓗ
LED Button
ARGB 컨트롤러 및 ⓗ버튼은 “KOR”사양에는 미포함 되어 있습니다.
ARGB LED 1~4 / 3-Pin
LED SW
5V
DATA
ARGB Connector
GND
ARGB LED Control Button / 2-Pin
- Connector to ARGB LED Control Button
Other Motherboards Sync / 3-Pin
- Connector to Motherboard
- Requires Motherboard that Supports RGB Sync
DATA
GND
5V
12V
Green
Red
Blue
※ Caution: if Addressable 3 Pin connects to 12V header
instead of 5V header improperly, It may cause fatal
damages to the product by the overvoltage.
※ Caution : Please do not connect
ARGB fans more than 8pcs, otherwise it
may cause malfunction.
SATA Power / 15-Pin
- Connector to PSU
- Input : 5V
※ How to control RGB LED
- LED colors & patterns can be changed by pressing the LED Button
on I/O ports.
PSU
- Long pressing on the LED Button for 6 seconds, RGB LED will be turn
off after blinking twice in white.
- Long pressing on the LED Button for 3 seconds, RGB will be
synchronized with motherboard after blinking once in white.
Press the LED Button again to desynchronize with motherboard.
Connect the ARGB connector to the RGB hub
1. Removing the side panels
8