Текст страницы
en
Cleaning and maintenance
Note: The longer the appliance remains
switched on, the finer the ingredients will
be cut. With herbs the desired cutting
result may be achieved very quickly after
switching the appliance on. A brief “tap” on
setting M may be sufficient.
■
After processing, release the rotary
switch. Disconnect the mains plug.
After using the appliance
Caution!
–
Do not use cleaning agents containing
alcohol or spirits.
–
Do not use any sharp, pointed or metal
objects.
–
Do not use abrasive cloths or cleaning
agents.
–
Do not wedge plastic parts in the
dishwasher as they could become
permanently deformed.
–
Carefully clean the filter basket slats of
the juice centrifuge so as not to damage
them.
■
Rotate the universal cutter anti-
clockwise and remove.
■
Turn the universal cutter over, and the
chopped food will fall into the lid.
■
Hold the lid. Rotate the jug anti-
clockwise and remove.
■
Remove the rest of the chopped food
from the jug using a suitable implement
(e.g. spoon).
■
Clean all parts immediately after use.
X “Cleaning and maintenance” see
page 27
Cleaning and maintenance
W Risk of injury!
–
Take care when handling sharp cutting
blades.
–
Grasp the universal blade by the
edge of the plastic handle only.
–
Grasp the cutting discs by the edge only.
–
Never grasp the sharp blades or edges
of the dicer insert. Grasp the slicing disc
by the plastic stud in the centre only.
–
Do not touch the blender blades and
universal cutter blades with bare hands.
–
Use a brush to clean the blades and
cutting discs.
The appliance requires no maintenance.
Thorough cleaning will guarantee a long
service life.
General information
■
Clean all parts immediately after use.
This will prevent residues from drying
on and possibly attacking the plastic
(e.g. essential oils in herbs).
■
When processing food such as carrots
and red cabbage, plastic parts may
become discoloured. This can however
be removed with a few drops of cooking
oil.
W Risk of electric shock!
Unplug the appliance before cleaning it.
Cleaning the base unit
■
Never immerse the base unit in liquids
or hold under running water and do not
clean in the dishwasher. Do not steam-
clean the appliance.
■
Wipe the base unit with a damp cloth.
If required, use a little detergent.
■
Then dry the base unit.
Cleaning the bowl, tools and
accessories
■
It is recommended rinsing all parts
under running water immediately after
use.
■
Take accessories apart before cleaning.
Do this in reverse order as described in
the individual chapters.
■
After cleaning, allow all parts to dry
thoroughly or rub dry.
27