Текст страницы
14 | English
Digital Laser Measure
GLM 400
Pollution degree according to IEC 61010-1
2D)
Laser class
2
Laser type
635 nm, < 1 mW
Laser beam diameter (at 25 °C) approx.
– 10 m distance
9 mmE)
– 40 m distance
45 mmE)
Automatic switch-off after approx.
– Laser
20 s
– Measuring tool (without measurement)
5 min
0.10 kg
Weight according to EPTA-Procedure
01:2014
Dimensions
106 x 45 x 24 mm
Protection rating
IP 54 (dust and splash-proof)F)
Batteries
2 x 1.5 V LR03 (AAA)
Rechargeable batteries
2 x 1.2 V HR03 (AAA)
Sound setting
●
A) For measurements from the front edge of the measuring tool, this applies for high reflectivity of
the target (e.g. a white-painted wall), weak backlighting and 25 °C operating temperature. In ad-
dition, a deviation of ±0.05 mm/m must be taken into account.
B) For measurements from the rear edge of the measuring tool, applies to low reflectivity of the tar-
get (e.g. a dark-painted wall), strong backlighting and –10 °C to +45 °C operating temperature.
In addition, a deviation of ±0.15 mm/m must be taken into account.
C) In continuous measurement mode, the max. operating temperature is +40 °C.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
E)
At an operating temperature of 25 °C
F)
Except battery compartment
The serial number (11) on the type plate is used to clearly identify your measuring tool.
1 609 92A 5G9 | (06.11.2019)
Bosch Power Tools