Текст страницы
EN
LASER DISTANCE METER
LASER DISTANCE METER
EN
Vector 100 CONDTROL
Vector 100 CONDTROL
User manual
User manual
Timer
Memory
Short press
Enter menu of functions.
Short press
Enter menu of functions.
Short press /
Select function “Timer”
Short press /
Select function “Memory”
A number of the measurement/calculation result is
Short press
Short press
Symbol will appear on display.
Default value is 5 seconds.
reflected in the symbol on the display.
Short press /
Set response time.
Short press /
Flip through saved measurement/calculation results.
Short press
Short press
Exit the mode.
Start the timer.
As soon as response time runs out, measurement
will be taken.
Measurement result will appear in the main line.
MESSAGE CODES
Short press
Exit the mode.
While operation, the following codes/symbols may appear on the display:
Bluetooth
Message
Cause
Solution
Short press
Enter menu of functions.
ERR 1
Laser signal is too weak.
Use a reflective plate.
Short press /
Select function “Bluetooth”
ERR 2
Laser signal is too strong.
Use a reflective plate.
ERR 3
Low battery.
Charge the battery.
Short press
Switch on Bluetooth. Symbol turns blue.
ERR 4
Failure of memory.
Contact the service center.
ERR 5
Failure of calculation by
Pythagoras Theorem.
Repeat the measurement.
Symbol appears on the display on the main
screen. Activate Bluetooth in the smartphone,
tablet PC or laptop. For further operation use
application Smart Measure CONDTROL.
ERR 6
Switch off Bluetooth. Symbol turns grey.
Please change to longer distance
product.
Measuring result exceeds
permissible measuring
range.
Short press
Symbol will disappear
ERR 7
Failure of tilt sensor.
Please contact service center.
from the display on the main screen.
23
22