Текст страницы
EN
LASER DISTANCE METER
LASER DISTANCE METER
EN
XP3 GREEN CONDTROL
XP3 GREEN CONDTROL
User manual
User manual
Calculation of horizontal distance by tilt sensor
+
Congratulations on your purchase of laser distance meter XP3 GREEN CONDTROL.
Safety instructions can be found in the end of this user manual and should be
carefully read before you use the product for the first time.
Calculations by Pythagoras’ Theorem
+
Stake-out function
+
Timer
+
Bluetooth
+
Internal memory
+
INTENDED USE
Laser distance meter XP3 GREEN is intended to measure distance, to stake out
a line, to calculate area and volume of measured objects as well as perform
calculations by tilt sensor and Pythagoras’ Theorem and able to transmit
measuring results via Bluetooth. The product is suitable for use at both indoor
and outdoor building areas.
Laser
Class II, 520 nm, <1 mW
Working temperature
–10 °С ... +50 °С
Storage temperature
–20 °С ... +60 °С
Dust and water protection
IP54
DELIVERY SET
The delivery set of XP3 GREEN includes:
1. Laser distance meter – 1pc.
2. Carry pouch with a strap - 1 pc.
3. User manual - 1 pc.
4. Batteries (type AAA) - 3 pcs.
5. USB charger - 1 pc.
Dimensions
136х59х28 mm
TECHNICAL SPECIFICATIONS
Weight
170 g
Working range*
0,05– 120 m*
Power supply
3 х battery AAA 800 mAh
1.2V Ni-MH
Measuring accuracy **
± 1,5 mm**
Smallest unit displayed
1 mm
Angle measuring range
90°
Smallest value of angle
0,1°
* Use a reflector to increase the measurement range during daylight or if the
target has poor reflection properties.
** Accuracy can decrease in unfavorable conditions, such as intense sunshine or
when measurements are made against glossy or transparent surfaces, moving
objects, objects with rough surface.
Angle measuring tolerance to the laser beam
-0,5°/+0,5°
Angle measuring tolerance to the housing
±0,3°
In unfavourable conditions or when measured distance is over 100 m the
maximum permissible accuracy is calculated in the following way:
Display backlight
+
Reference point setting
+
± (Y + 0,25хDх10-3) mm, where
D (mm) - measured distance
Y (mm) - permissible accuracy according to technical data.
Continuous measurement (tracking)
+
Max./min. value
+
Addition/subtraction
+
Area/wall area/volume
+
5
4