Текст страницы
5
English
REMOTE CONTROL
2
1.
Side vertical (V) laser beam button
2.
All laser lines On/Off button
3.
Horizontal (H) laser lines On/Off button
4.
Front vertical (V) laser line button
LASER LINES
3
Laser lines scheme is shown in the picture
SAFETY INSTRUCTIONS
•
Please follow up instructions given in operating manual.
•
Do not stare into beam. Laser beam can lead to eye injury (even from
greater distances).
•
The laser line should be set up so that the beam path is not at normal
eye level.
•
Use the instrument for measuring jobs only.
•
Do not open instrument housing. Repairs should be carried out by
authorized workshops only. Please contact your local dealer.
•
Do not remove warning labels or safety instructions.
•
Keep instrument away from children.
•
Do not use instrument in explosive environment.
PREPARATION BEFORE OPERATION
1. Check the battery power before operation: press button (10) near the
battery power indicator. The quantity of flashing bars shows the power
level. All bars are flashing when the battery is fully charged. If the bars do
not flash or only few bars are flashing, charge the battery or replace (if
available) the battery.
2. To change the battery, press the latch on the bottom part of the battery
and gently pull the case to remove it. Place a fully charged battery instead of