Текст страницы
9
English
necessary to contact an authorized service center.
Note: Due to the design of the laser emitter, discontinuity and different
brightness intensity of the laser beam around the perimeter in different
lighting conditions are allowed. Discontinuity of the laser beam: laser
glare, but the middle of the beam is determined. Different laser beam
brightness: up to 50% intensity difference.
PRODUCT LIFE
Product life of the tool is 5 years. Dispose of the device and its batteries
separately from household waste. Date of production, manufacturer’s
contact information, country of origin are indicated on the product
sticker.
CARE AND CLEANING
Please handle line laser with care. Clean with soft cloth only after any use.
If necessary damp cloth with some water. If instrument is wet clean and
dry it carefully. Pack it up only if it is perfectly dry. Transport in original
container/case only.
Note: During transport On/Off pendulum lock (8) must be set to posi
tion “OFF”. Disregard may lead to damage of pendulum.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
•
Measurements through glass or plastic windows;
•
Dirty laser emitting window;
•
After instrument has been dropped or hit. Please check the accuracy.
•
Large fluctuation of temperature: if instrument will be used in cold
areas after it has been stored in warm areas (or the other way round)
please wait some minutes before carrying out measurements.