Текст страницы
SKIL_IB510v2 22-09-2006 10:09 Pagina 7
GB
N Adjustment handle (tripod)
P Locking knob (tripod)
Q Extension rod (tripod)
USE
Automatic leveling laser
510
INTRODUCTION
●This tool is intended for the defining and checking of
exact horizontal, vertical and crossed lines by projecting
self-leveling laser beams
●Carefully read this instruction manual as well as the
warning label on the tool, before you use the tool 1
●Mounting of batteries 4
-
open cover D
-
insert 2 x AA (LR6) / 1,5V batteries (pay attention to
correct polarisation)
-
close cover D and ensure it is in place securely
-
always remove the batteries from the tool, if the tool
is not used for a long period
-
always replace the complete set of batteries
●Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious (eye) injury
●Save this instruction manual for future reference
TECHNICAL SPECIFICATIONS
●On/off 5
-
switch on/off the tool by pressing button A or button B
!
do not look into the laser beam
!
do not point the laser beam at persons or animals
!
always switch off the tool after use
!
always lock the self-leveling system after use and
during transportation by sliding switch C in the
lock-position
Laser type
650 nm
Laser class
2
Power output
< 1 mW
Power supply
2 x AA (LR6) / 1,5V battery
Operating temperature
-10°C to 55°C
Storage temperature
-20°C to 60°C
Self-leveling range
≤± 4°
Weight
0,68 kg
Accuracy
+/- 1 mm/m
SAFETY
●Do not look into the laser beam (laser radiation) 2
●Do not point the laser beam at persons or animals
●Do not place the tool in a position that may cause
anyone to look into the laser beam intentionally or
unintentionally
●Do not use any magnifying optical tools (such as
magnifying glasses, telescopes, or binoculars) to view
the laser beam
●Do not remove or damage the warning label on the tool
●Do not operate the tool in the presence of flammable
liquids, gases or dust
●Do not operate the tool with children around
●This tool should not be used by people under the age of
16 years
●Operating the tool 6
-
position the tool on a horizontal surface
-
switch on the tool
!
if the surface inclines more than 4°, the tool is out
of its self-leveling range
-
level the tool by turning adjustment knobs E in such a
way that the bubbles in levels F are centered
-
only use the bubble levels as a first rough indication
for leveling
!
before projecting a line shake the tool somewhat
in order to activate the self-leveling system
-
project a horizontal line by pressing button A
-
project a vertical line by pressing button B
-
project a crossed line by pressing button A and B one
after the other
-
obstructions in front of the tool will not affect the line
projection 7
-
use the tool manually for quick reference of a straight
line or alignment of two points of reference (lock the
self-leveling system) 8
-
make measurements using the projected line as
reference 9
●Do not use the tool for any purpose other than those
mentioned in this instruction manual
●Only use the original accessories which are intended for
this tool
●Aligning objects horizontally on adjacent walls 0
-
rotate tool manually for easy projection of horizontal
lines across a room
-
use graduation scale G 3 for making accurate
alignments across a room
TOOL ELEMENTS 3 $
●Aligning objects vertically on adjacent surfaces !
-
rotate tool manually for easy projection of vertical
lines across a room
-
use graduation scale G 3 for making accurate
alignments across a room
●Aligning objects using the crossed line projection @
●Laser viewing glasses #
-
for improving the view of the laser line
!
these glasses will not protect your eyes against
laser radiation
●Tripod $
-
unfold the tripod
-
lock the tripod with ring K
A On/off button for projecting horizontal lines
B On/off button for projecting vertical lines
C Switch for locking self-leveling system
D Battery compartment cover
E Adjustment knobs
F Bubble levels
G Graduation scale
H Laser light opening
J Warning label
K Locking ring (tripod)
L Locking clips (tripod)
M Tripod rod
7