Текст страницы
Weight (with batteries)
0.55 kg
Accuracy
+/- 0.5 mm/m
Working area
10m
Tripod range
40-114 cm
CONTENTS
- Self-levelling laser level
- Tripod
- Plastic base with thread for tripod attachment
- Plastic case
- Batteries
TOOL PARTS
a. Switch of horizontal line
b. Switch of vertical line
c. LED Pointer
d. Battery compartment
e. Laser light aperture (NEVER look at the source of laser
beam)
f. Battery compartment
g. Fine adjustment knob
h. Phial of level
i. Tripod
ASSEMBLY/SETTINGS
–– Keep the instruction manual for future reference.
–– DO NOT LOOK AT THE SOURCE OF LASER BEAM.
Do not bring to accidental pointing the laser beam at
bystanders’ or animals’ eyes for a period longer than
0.25 second, for instance by pointing the laser beam
at mirrors.
–– Do not, either intentionally or unintentionally, point
the laser beam at people or animals.
–– Always ensure the laser beam points at stable object
without reflective surfaces. Appropriate surfaces
are, for example, wood and rough coatings. Light,
glittering, reflecting metal plates and similar materials
are not appropriate for working with laser, because
they may reflect the laser beam and point it on the
user.
–– CAUTION: Never attach any optical device to the
laser. Do not use any optical device with the tool.
–– CAUTION: Do not modify the device in any way, it
may cause dangerous radiation.
–– All repairs should be carried out by the manufacturer
or authorized service point. Do not replace laser unit
with device of other type.
–– You may find it difficult to observe laser beam in
strong sunlight and on some surfaces.
–– Switch off the laser always when the laser level is not
used or when the tool is left unattended.
–– Be careful when using the laser level, this is a precise
device.
–– Store the tool beyond reach of children and domestic
pets. Do not allow children to operate the device.
–– Store unused equipment in appropriate conditions:
in dry and clean place.
–– Use of protective goggles is recommended.
Device is easy to operate laser level allow to emission
red laser light. Property of selfleveling. It allows you
to quickly obtain the effects of work. Level allows to
emission horizontal and vertical lines on wall. Changing
the operate mode is reached by push the button. Level
requires only simple mounting on a tripod or placed on
a stable surface.
WARNING
Installation of battery:
Make sure that the device is switched off
–– Remove the battery compartment cover (f).
–– Insert 2 AA batteries following the polarity markings
located in the lid.
–– Close the battery compartment cover (f) so that it is
safely mounted in place.
WARNING! Remove the batteries from the device
whenever it is not used for a long period of time.
Proper placement of the device–leveling
WARNING! DO NOT allow children to operate the level.
WARNING! DO NOT look at the laser beam. LASER is
harmful to your eyes.
WARNING! DO NOT point the laser beam at other
persons’ or animals’ eyes.
TECHNICAL SPECIFICATION
The device should be put in place measure on a stable
surface or use a tripod . Level should be set to the
correct height , so that the laser lines are fully visible and
overlap with the work surface . Self-leveling system is
done automatically when the lock system is off.
Adjusting the base by 3 rotary knobs that are based on
the level indicator helps to set the device so that the
base was in a horizontal position.
Mounting on a tripod
In order to achieve a stable position spirit level it can
be mounted on a tripod . This is achieved by special
Laser wavelength
650 nm
Laser class
2
Laser power
< 1mW
Power supply
2 AA batteries, 1.5 V
Estimated battery life
12 hours
Operating temperature
-5ºC to 55ºC
Levelling range
± 4°
Levelling stabilization time
< 6 s
7
TOPEX.PL