Текст страницы
H610M-HDV/M.2 R2.0
H610M-HVS/M.2 R2.0
Step 3
A
B
C
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location C by default. Skip Step 3 and
4 and go straight to Step 5 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 4
A
B
C
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
A
B
C
A
B
C
20o
Step 6
English
NUT1
NUT2
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
25