Текст страницы
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis
must support HDA to function correctly. Please follow the instructions in our
manual and chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
4 3 2 1
FAN_SPEED_CONTROL
FAN_VOLTAGE
CHA_FAN_SPEED
Chassis/Water Pump Fan
Connector
(4-pin CHA_FAN1/WP)
(see p.1, 2, No. 4)
GND
This motherboard provides
a 4-Pin water cooling chassis
fan connector. If you plan to
connect a 3-Pin chassis water
cooler fan, please connect it
to Pin 1-3.
4 3 2 1
This motherboard provides
a 4-Pin CPU fan (Quiet Fan)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1, 2, No. 2)
connector. If you plan to
CPU_FAN_SPEED
connect a 3-Pin CPU fan,
FAN_SPEED_CONTROL
please connect it to Pin 1-3.
12
24
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, 2, No. 5)
This motherboard provides
a 24-pin ATX power con
nector. To use a 20-pin ATX
power supply, please plug it
along Pin 1 and Pin 13.
1
13
English
22