Текст страницы
Lubrication
Troubleshooting
Problem
Action
Charge the clipper.
(See page 8.)
English
The clipper has become blunt.
Clean the blade and apply oil.
(See pages 10 and 11.)
Replace the blade.
(See page 10.)
• Apply the oil to the clipper before and after each use.
Apply a drop of the oil to each
indicated point.
Failure to apply the oil may cause the
following problems due to rust, wear or
burn out.
- The clipper has become blunt.
- Shorter operating time.
- Louder sound.
Clipper stopped functioning.
►
►Replacement parts
Replacement part is available at your dealer or Service Centre
Charge the clipper.
Or use with the AC operation.
(See page 8.)
Replacement parts for ER-GP80
Blade
WER9900
Push the main body into the
charging stand or appliance
plug all the way.
Cleaning the charging stand
The clipper cannot be charged.
Use the cleaning brush to clean hair trimmings and dust in the
charging plug or in the hole on the bottom surface.
Charge within the
recommended charging
temperature of 10 °C to 35 °C.
Have the battery replaced by an
authorized service centre.
Clipper can be used for only
about 10 minutes even after
charging.
Makes a loud sound.
Confirm that the blade is
properly attached.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service centre authorised by Panasonic for repair.
11