Текст страницы
IM2021
6. Warranty card - 1 pcs.
7. Packaging material – 1 pc.
7.
ASSEMBLY AND INSTALLATION
1. Unpack the radiator and roller wheels and remove all the packaging material.
2. Put the radiator upside down on a carpet or soft surface, to avoid damage to
lacquer coating.
3. Install wheel plates on the lower part of radiator sections using U-shaped
brackets and finger nuts, into two fixed supports.
4. Tighten two finger nuts on one side and two finger nuts on the other – in clamp
extensions passed through the wheel plate supports, after making sure that 2
openings in the wheel plate match together with the clamp extensions (see Fig. 3).
5. Turn the radiator back on the wheels.
Fig. 2 Fig. 3
IMPORTANT!
1. Switch on and operate the radiator only when it is in vertical position (with wheels
below and control elements above). Any other position may cause a dangerous
situation and result in failure of the oil-filled radiator or damage of property. The
manufacturer will consider this as a non-warranty case.
2. Do not switch the radiator on, if roller wheels are not installed.
8.
OPERATION OF THE DEVICE
1. Before starting to use the device read section «Safeguards».
2. Connect the unit’s power cord to an electric outlet, observing all of the mentioned
precautions. Remember that you can connect the unit to electric mains only if the
18