Текст страницы
IM2023
Note:
The number of voice commands to control smart technology with Alice is limited. When
adding new devices in the Home Intellect application, it is necessary to update the list
of devices in Alice. To do this, press the + button in the DEVICES interface, then ADD
DEVICE, select Home Intellect in the list, then click UPDATE DEVICE LIST.
10. CLEANING AND MAINTENANCE OF THE UNIT
1. Remember that you must clean the unit regularly to remove dust from the heating
sections. Dust and dirt on the unit have a negative effect on the unit’s operational
efficiency. In some cases a smell of burning dust can cause a headache and nausea,
as well as other negative health effects. Also a dirty unit cannot operate 100%
effectively, temperature parameters of the room heating can be disrupted.
2. Before cleaning of the unit, you must switch off the unit, unplug it from electric mains
(see «Safeguards») and let the unit cool down.
3. Clean the unit’s sections and other surfaces with a soft, slightly damp duster/cloth.
The cloth must not leave fluff on the unit.
4. It is not recommended to use detergents, including liquids/materials containing
abrasive elements.
5. During cleaning, please, do not damage the unit with sharp objects (hard sponge,
polishing paper, etc). Scratches on the painted surface can result in rusting.
6. Switch on and use the unit again only after reading all «Safeguards»; also make
sure that the unit is absolutely dry.
NOTE:
The color change of the sections is not a defect, but is a consequence of the operation
of the device in a room with heavily polluted air.
11. TROUBLESHOOTING
Possible malfunctions and solutions for them are indicated in table 2.
If it is impossible to solve these malfunctions with these methods, contact the
authorized service center.
Table 2
Malfunction
Possible cause
Solution
The device is connected
to the mains, operating
mode is set to heating but
device isn’t working.
No power
Check whether the power
supply is disconnected
from
the device and, if
necessary,
connect device to power
supply
Electrical circuit of heating
element malfunction
Change the circuit breaker
Contact an authorized
service center
Malfunction in circuit
breaker
44