Текст страницы
Z890 Taichi
1.7 M.2 Expansion Card
The M.2 Expansion Card supports up to four PCIe NVMe SSDs.
It is required to enable PCIE2 Bifurcation in the UEFI setting to set bifurcation to x1x1x1x1
mode. To do so, please press the “F2” key during POST to enter UEFI setup. Go to Advanced\
Chipset Configuration and set “PCIE2 Bifurcation” to “Enabled”. Press the “F10” key to save
configuration changes.
Installing the M.2 Expansion Card
- Power off the PC and unplug the power cord. Detach all other cables from the PC.
- Remove the PC cover.
- Align and insert the card into the PCIe 4.0 slot (PCIE2) on the motherboard. Press
firmly until the card is securely seated in place.
Specifications
Platform
• Dimensions: 4.38-in x 5.09-in
Interface
• PCIe Gen4x4 interface (supports four x1 mode)
Connectors
• 4 x Hyper M.2 Sockets (Key M), supports type
2242/2260/2280 PCIe Gen4x1 (16 Gb/s) mode
13