Текст страницы
10. USB 2.0 header
The USB 2.0 header allows you to connect a USB module for additional USB 2.0 ports.
The USB 2.0 header provides data transfer speeds of up to 480 Mb/s.
USB_1415
USB_16E1
USB_E23
CAUTION! DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
11. Addressable RGB Gen 2 header
The Addressable RGB Gen 2 header allows you to connect individually addressable
RGB (ARGB) WS2812B LED strips or WS2812B based LED strips.
ADD GEN2_1
ADD GEN2_2
ADD GEN2_3
CAUTION! Before you install or remove any component, ensure that the power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
NOTE:
• The Addressable RGB Gen 2 header supports addressable RGB LED strips (5V/Data/Ground),
with a maximum power rating of 3A (5V). Additionally, the addressable header on this board
can support up to 120 LEDs per header in Gen1 mode, or a combined maximum of 500 LEDs in
Gen2 mode.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the addressable RGB LED strip is connected in the
correct orientation, and the 5V connector is aligned with the 5V header on the motherboard.
• The addressable RGB LED strip will only light up when the system is powered on.
21