Текст страницы
9.
USB 5Gbps header
The USB 5Gbps header allows you to connect a USB 5Gbps
module for additional USB 5Gbps ports. The USB 5Gbps header
provides data transfer speeds of up to 5 Gb/s.
10. USB 2.0 header
The USB 2.0 header allow you to connect USB modules for
additional USB 2.0 ports. The USB 2.0 header provides data transfer
speeds of up to 480 Mb/s.
CAUTION! DO NOT connect a 1394 cable to the USB connectors. Doing
so will damage the motherboard!
11. Addressable Gen 2 headers
ADD_GEN 2
Ground
The Addressable Gen 2 headers allow you to connect individually
addressable RGB (ARGB) WS2812B LED strips or WS2812B based
LED strips.
Data
+5V
PIN 1
CAUTION! Before you install or remove any component, ensure that
the power supply is switched off or the power cord is detached from
the power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, or components.
NOTE:
• The Addressable Gen 2 header supports addressable RGB LED strips (5V/Data/Ground), with
a maximum power rating of 3A (5V). Additionally, the addressable header on this board can
support up to 120 LEDs per header in Gen1 mode, or a combined maximum of 500 LEDs in
Gen2 mode.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the addressable RGB LED strip is connected in the
correct orientation, and the 5V connector is aligned with the 5V header on the motherboard.
• The addressable RGB LED strip will only light up when the system is powered on.
RGB_HEADER
12. Aura RGB header
The Aura RGB header allows you to connect RGB LED strips.
CAUTION! Before you install or remove any component, ensure that the power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
NOTE:
• The Aura RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum
power rating of 3A (12V).
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip
is connected in the correct orientation, and the 12V connector is aligned with the 12V header
on the motherboard.
• The LED strip will only light up when the system is powered on.
1-4
Chapter 1: Product Introduction