Текст страницы
14. BMC Thermal Sensor header
The BMC Thermal Sensor header allows you to connect a sensor to monitor the
temperature of the devices and the critical components inside the motherboard
through BMC. Connecting the T sensor cables and setting BMC_SW to enabled will
allow you to view the sensor readings in both the BIOS and on the web UI.
BMC_T_SENSOR
15. Chassis Intrusion header
The Chassis Intrusion header allows you to connect a intrusion sensor or microswitch
for the chassis intrusion detection feature. When you remove any chassis component,
the sensor or microswitch triggers and sends a high level signal and records a chassis
intrusion event.
CHASSIS
16. COM Port connector
The COM (Serial) Port connector allows you to connect a COM port module. Connect
the COM port module cable to this connector, then install the module to a slot opening
on the system chassis.
COM
17. CPU Over Voltage jumper
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible
overclocking system (depending on the type of the installed CPU). Set to pins 2-3 to
increase the CPU voltage setting, or set to pins 1-2 to use the default CPU voltage
setting.
CPU_OV
27