Текст страницы
5.
Water Block header
The Water Block header allows you to connect sensors to monitor the temperature,
flow rate, and water leak signals of your third party monoblocks. You can manually
adjust the fans and water pump to optimize the thermal efficiency of your third party
monoblocks.
WB_SENSOR
6.
Power connectors
These Power connectors allow you to connect your motherboard to a power supply.
The power supply plugs are designed to fit in only one orientation, find the proper
orientation and push down firmly until the power supply plugs are fully inserted.
CPU_12V_1
CPU_12V_2
ATX_PWR
PCIE_8PIN_PWR
CAUTION! Ensure to connect the 8-pin power plug, or connect both the 8-pin power plugs.
NOTE:
• We recommend that you use a PSU with a higher power output when configuring a system with
more power-consuming devices. The system may become unstable or may not boot up if the
power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, we recommend using a PSU
with 900W~1200W power or above to ensure the system stability.
• PSU input: AC 100~240V, 6A/3A, 50/60Hz.
26