Текст страницы
4.
Fan and Pump headers
The Fan and Pump headers allow you to connect fans or pumps to cool the system.
CPU_FAN
CHA_FAN
AIO_PUMP
CAUTION!
• DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan headers!
• Ensure the cable is fully inserted into the header.
IMPORTANT! For water cooling kits, connect the pump connector to the AIO_PUMP header.
Header
Max. Current
Max. Power
Default Speed
Shared Control
CPU_FAN
1A
12W
Q-Fan Controlled
-
CHA_FAN
1A
12W
Q-Fan Controlled
-
AIO_PUMP
1A
12W
Full Speed
-
5.
Power connectors
These Power connectors allow you to connect your motherboard to a power supply.
The power supply plugs are designed to fit in only one orientation, find the proper
orientation and push down firmly until the power supply plugs are fully inserted.
ATX_PWR
CPU_12V
CAUTION! Ensure to connect the 8-pin power plug.
NOTE:
• For a fully configured system, we recommend that you use a power supply unit (PSU) that
complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of
350 W.
• We recommend that you use a PSU with a higher power output when configuring a system with
more power-consuming devices. The system may become unstable or may not boot up if the
power is inadequate.
• PSU input: AC 100~240V, 6A/3A, 50/60Hz.
1-9