Текст страницы
11. Addressable Gen2 header
The Addressable Gen2 header allows you to connect individually addressable RGB
(ARGB) WS2812B LED strips or WS2812B based LED strips.
ADD GEN2_1
ADD GEN2_2
CAUTION! Before you install or remove any component, ensure that the power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
NOTE:
• The Addressable Gen2 header supports addressable RGB LED strips (5V/Data/Ground), with
a maximum power rating of 3A (5V). Additionally, the addressable header on this board can
support up to 120 LEDs per header in Gen1 mode, or a combined maximum of 500 LEDs in
Gen2 mode.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the addressable RGB LED strip is connected in the
correct orientation, and the 5V connector is aligned with the 5V header on the motherboard.
• The addressable RGB LED strip will only light up when the system is powered on.
12. RTC Battery header
The RTC Battery header allows you to connect the lithium CMOS battery.
BATT_CON
13. Front Panel Audio header
The Front Panel Audio header is for a chassis-mounted front panel audio I/O module
that supports HD Audio. Connect one end of the front panel audio I/O module cable to
this header.
F_AUDIO
1-12