Текст страницы
14. Alteration PCIe Mode switch
The Alteration PCIe Mode switch allows you to switch the PCIe signal which comes
from the CPU from between Gen4 or Gen3 for the PCIe slot.
ALT_PCIE_MODE
NOTE:
• When the Alteration PCIe Mode switch is set to Auto, the PCIe signal from the CPU will be the
default setting.
• When the Alteration PCIe Mode switch is set to 1st step, the PCIe signal from the CPU will be
Gen4, and LED1 will light up green.
• When the Alteration PCIe Mode switch is set to 2nd step, the PCIe signal from the CPU will be
Gen3, and LED2 will light up yellow.
• The nearby LEDs indicate which PCIe mode is currently selected.
15. RTC Battery header
The RTC Battery header allows you to connect the lithium CMOS battery.
BATT_CON
16. CPU Over Voltage jumper
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible
overclocking system (depending on the type of the installed CPU). Set to pins 2-3 to
increase the CPU voltage setting, or set to pins 1-2 to use the default CPU voltage
setting.
CPU_OV
17.
Power Button header
The Power Button header allows you to connect the power button when the ROG
STRIX Front Panel SATA card is not installed to the motherboard. Connect one end of
the power button cable to this header.
POWER_BTN
NOTE: You can choose whether to connect the power button to either the POWER_BTN header
or to the power button pins on the F_PANEL.
24