Текст страницы
Using the PCIe Slot Q-Release Slim
The PCIe Slot Q-Release Slim feature allowing you to easily remove an expansion card
installed to this PCIe slot, even when an expansion card may be blocking the PCIe push-
latch.
To release an expansion card on a PCIe Slot Q-Release Slim:
1.
Make sure the expansion card is aligned to the PCIe slot and perpendicular to the
motherboard before removing the expansion card.
2.
Hold firmly onto the end of the expansion card closest to the motherboard rear IO
ports, then slightly pull the expansion card away from the motherboard at an angle to
release the expansion card.
3.
Once the expansion card is completely released from the PCIe Slot Q-Release Slim,
you may remove the expansion card.
NOTE: The illustration below is for reference only. The motherboard and PCIe Slot Q-Release Slim
may differ between models, but the steps for using the PCIe Slot Q-Release Slim remain the same.
CAUTION! ONLY remove the expansion card from the end closest to the motherboard rear IO
ports. Removing the expansion card by holding onto any other part of the expansion card with
excessive force may cause damages to the expansion card and/or motherboard.
Tilt at an angle to
release expansion
card
21